Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Liner & Rebuild in New City: What to Know First
We provide independent Olympia Chimney chimney liner and rebuild service throughout New City, with most liner replacements and partial rebuilds completed in a single visit and priced upfront before any work begins. A typical stainless steel liner installation for an Olympia system runs between $2,800 and $4,500 in this market, depending on flue height and access. We are not affiliated with or authorized by Olympia Chimney; we are an independent Olympia Chimney service provider who sources professional-grade parts and stands behind the installation with our 90-Day Done Right Promise.
This page is for New City homeowners who have an Olympia Chimney liner, cap, or component showing signs of failure, or who need a full or partial chimney rebuild and want to know whether their existing Olympia parts can be reused or must be replaced. If that’s your situation, call us at (845) 599-0930. A live person answers, 24 hours a day.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia Chimney stainless steel liner collars loosen in freeze-thaw cycles. The collar connection on Olympia’s standard-duty liners uses a single-ply seam that works loose after five to seven winters in Rockland County’s wet freeze-thaw pattern. We’ve found this especially common in homes near New City’s higher elevations where temperature swings are sharper. We replace with a heavier-gauge collar and add a mechanical lock ring, not just sealant.
- Olympia Chimney flexible liners harden and crack at the first bend above the smoke chamber. The 316-alloy flexible liners Olympia shipped in the 2008-2015 period carry a 20-year warranty but often show stress cracking at the first offset by year 12 in New City’s climate. The creosote acidity plus condensation at that low point accelerates metal fatigue. We camera-inspect to confirm crack depth, then sleeve with DuraFlex Pro or replace entirely depending on severity.
- Olympia Chimney’s original equipment terra cotta adapters chip during liner extraction. When we’re called to pull a failed Olympia liner and the terra cotta thimble has been in place since the 1980s, the adapter often crumbles on removal. Olympia’s current adapter spec has changed twice, so we keep three generations in stock or machine-fit a HeatShield-compatible transition that seals properly without waiting on backordered OEM parts.
- Olympia Chimney top-mount dampers corrode at the hinge pin. The cast-aluminum damper bodies hold up fine, but the galvanized hinge pin on pre-2018 Olympia top-sealing dampers seizes or shears after a decade of acid rain exposure common in the Hudson Valley. We can rebuild the damper with a stainless pin and bushing, or replace with a Gelco unit if the frame is too far gone.
- Olympia Chimney’s snap-lock chimney caps deform under heavy snow load. The standard 0.024-inch aluminum cap Olympia bundles with many liner kits flattens or pulls its fasteners during wet, heavy snows like the ones New City sees most winters. We upgrade to a 0.032-inch stainless cap with through-bolt mounting, or a Copperfield custom-fabricated cap for masonry chimneys with irregular crown profiles.
Our Olympia Chimney Chimney Liner & Rebuild Process
- 1
Call and schedule. A live person answers, day or night. We ask about your Olympia Chimney model if you know it, the symptoms you’re seeing, and when you last had a Level-2 inspection. We book a time window and confirm it the morning of.
- 2
Level-2 camera inspection with photo documentation. Our technician runs a camera the full length of the flue, photographs every joint, offset, and transition, and records the condition of your Olympia liner, any terra cotta, and the masonry crown. You see the images on a tablet before we discuss anything.
- 3
Plain-English verdict and upfront pricing. Russell Haines or one of our senior techs explains what failed, why it failed, and whether your Olympia components are salvageable. We quote liner replacement, rebuild scope, or repair in writing. The number on the estimate is the number on the invoice.
- 4
Parts decision: OEM Olympia, compatible aftermarket, or hybrid. If your warranty is active and the part is available, we’ll source Olympia Chimney OEM. If lead time is excessive or the OEM spec has changed, we use DuraFlex, HeatShield, or Gelco equivalents that meet or exceed the original rating. We document what we used and why.
- 5
Installation or rebuild with same-day completion. Most liner replacements and partial rebuilds finish in one visit. Full chimney rebuilds may need a second day for curing. We test draft and smoke spillage before we pack up.
- 6
Cleanup, photo report, and guarantee in writing. We leave the work area cleaner than we found it. You get a photo report, the 90-Day Done Right Promise, and our direct line if anything feels off. If it’s not right, we don’t leave until it is.
What Olympia Chimney Chimney Liner & Rebuild Costs in New City
| Service | Typical Range in New City | What Moves the Price |
|---|---|---|
| Olympia Chimney liner repair (patch, sleeve, or collar) | $650 - $1,400 | Height of chimney, accessibility, whether terra cotta must be disturbed |
| Olympia Chimney stainless steel liner replacement (flexible) | $2,800 - $4,500 | Flue length, number of offsets, liner diameter, insulation wrap required |
| Olympia Chimney rigid liner replacement | $3,200 - $5,100 | Number of flues, custom offsets, top-sealing damper integration |
| Partial chimney rebuild with Olympia liner replacement | $4,500 - $7,800 | Courses to rebuild, crown condition, whether scaffolding is needed |
| Full chimney rebuild (above roofline) with new liner system | $8,500 - $14,000 | Height, brick matching, liner spec, cap and damper selection |
These are real 2024-2025 price ranges for the New City market, based on jobs we’ve completed from neighborhoods near Veterans Memorial Park up through the Tappan Zee corridor. Every estimate is free, and we apply our standing offers where they fit: $50 off any repair over $250, a free second opinion on any written estimate, and a permanent 5% senior and veteran discount. Call (845) 599-0930 for an exact quote.
Why New City Homeowners Call Hearthstone Chimney Co. for Olympia Chimney Work
We’ve been answering the phone with a live person for over 42 years, and we plan to be here in thirty more. That changes how you treat a job. Our 90-Day Done Right Promise means if it’s not right, we make it right, in writing, no arguing. Our technicians are background-checked, uniformed, and trained on Olympia Chimney’s product evolution, from the early flexible liners to current rigid systems. When Olympia parts are backordered or discontinued, we draw on our relationships with DuraFlex, HeatShield, Gelco, and Copperfield to keep your project moving. Photos you can see, a plain-English verdict, and a square deal with no surprises on the bill. That’s the Keystone Standard.
FAQs
No, if the repair is done with OEM-spec parts and proper documentation, but Olympia Chimney’s warranty covers manufacturing defects, not installation errors or normal wear. As an independent Olympia Chimney service provider, we document every part number and installation detail so any legitimate warranty claim remains valid. Call (845) 599-0930 if you’re unsure whether your liner is still under warranty, and we’ll help you check.
Most flexible liner replacements take four to six hours and are completed in a single visit. Rigid liner systems or jobs requiring crown rebuild add two to four hours. Full chimney rebuilds typically span two days to allow proper curing between courses. We confirm the timeline when we quote, and we don’t leave until the draft test passes.
Sometimes, if they’re in spec and undamaged. We camera-inspect and measure during our initial visit. Pre-2018 Olympia dampers often need hinge pin replacement or full upgrade to Gelco hardware. Reusing a compromised cap or damper to save a few hundred dollars is a false economy, and we’ll tell you plainly when that’s the case.
The camera tells the story. Isolated cracks, collar leaks, or minor offset damage usually warrant repair or sleeve. Multiple cracks, spalling terra cotta, or visible mortar loss through the liner indicate the masonry itself is failing and needs rebuild. We show you the footage and explain which category you’re in, with no pressure to commit to more work than the chimney actually needs.
Cracked or separated liners allow combustion gases, including carbon monoxide, to enter wall cavities and living spaces. Creosote can also leak into gaps and ignite where you can’t see it. In New City’s wet winters, freeze-thaw cycles widen existing cracks. The risk is real, but we don’t scare-sell. If our inspection shows the liner is compromised, we’ll explain exactly what we found and what safe operation requires. Call (845) 599-0930 for a free estimate.
Written by Russell Haines, Owner, Hearthstone Chimney Co. at Hearthstone Chimney Co., serving New City and nearby areas.